1. This machine is controlled by PLC program, computer screen, which can record every production time and data.
2. The reed is controlled by frequency conversion motor, which can adjust different speeds or lengths, which is faster, more accurate,
It is stable and has a film release function to prevent film waste.
3. In order to meet the factors of different mold shapes and extrusion by vacuum forming, the finished product can be obtained
to the required requirements.
4. The stamping plate can be independently divided into ascending and descending, and can be set to form at two-stage speed and adjust the height and low configuration.
Combine different high and low shapes to produce at maximum speed.
5. The width is adjusted by motor, which is convenient and fast.
6. The electric oven is divided into upper and lower oven systems, and temperature control is used to make the temperature more moderate and easy to control.
Low power consumption.
7. The electric motor for adjusting the top gate is driven forward and backward, which is easy to operate.
8. The built-in water transport cooling system is cooled and formed using a refrigerated cabinet, and the heat insulation board is prepared, which is large in size
Liang carries water faster.
9. There is also an installed number meter for each production batch or roll of film production statistics.
10. If there is a power outage or inspection during the production process, only the electric oven should be removed for safety reasons.
11. The PLC program has 100 sets of memories configured (standard, how many sets are needed can be rejected in advance.)
Users can upload the corresponding production parameters, item number, file number and manufacturer name to
In the memory file, it can be retrieved and used in re-production, which is convenient and time-saving.